| TEL: (800) 422-4231 | A division of Letters Unlimited Inc. | FAX: (800) 310-1557 |
| Home Prices Colors Fonts Symbols Clip art Logos Striping Order FAQs Contact us |
Alternative lettering installation instructions
Center Hinge Method
 Figure 1  Figure 2  Figure 3  Figure 4 |
- Position legend with tacks (small pieces of masking tape). See figure 1
- Apply masking tape vertically through center of legend. See figure 2
- Remove tack from one end, lay legend over towards center tape hinge.
- Pull release liner away from application tape and legend until close to hinge.
- Cut release liner with scissors and discard.
- Squeegee down exposed half of legend, holding the end up and allowing the squeegee to cause contact.
- Remove the tack hinge and lay the other half over.
- Remove the rest of the release liner and squeegee into place.
- Remove application tape.
Horizontal Hinge Method
- Position legend with tacks (small pieces of masking tape). See figure 1
- Apply masking tape horizontally across top of legend.Ý See figure 3
- Remove both tacks.
- Cut legend into smaller areas (vertically between letters). See figure 4
- Starting at right (if right handed), flip one section over and release liner.
- Wipe sign surface free of dust (which may have come from back of legend).
- Squeegee into place using one smooth downward stroke.Ý Repeat for balance of legend.
- Re-squeegee using more pressure.
- Remove application tape.
| Home Prices Colors Fonts Symbols Clip art Logos Striping Order FAQs Contact us | |||
|
