Static Window Cling
Step-by-step instructions for Custom Static Window Clings and Signs
Step 1 : Wet application front and back as you remove from liner.
Step 2 : Keep wet, both sides this will help not stick to its self. Very important.
Step 3 : Keep both sides wet this will help static from sticking to itself. As you remove liner very important.
Step 4 : Clean glass, and keep glass wet while applying.
Step 5 : Apply to wet glass, (squeegee provided with order) spray with additional water. (Water should have a couple of drops of dish soap to add slipperiness).
Step 6 : Keep wet. Static cling window signs can be applied to front of glass or outside of glass. Slide around until you get it where you want it.
Step 7 : Squeegee out remaining water from center out all around until all water is out from behind graphic, keep back wet while doing so.
Step 8 : Dry off when complete with cloth or paper towel.
Step 9 : Finished.